DFT Floating Hydroponics System from China Suppliers - High-Quality Factory Solutions for Efficient Vegetable Gardening

In the summer when indoor temperature rise to a certain value, it can reflect a part of the sun and diffuse sunshine into the greenhouse according to the different shading rate, achieving the purpose of cooling temperature. Close sunshade screen, at the same time the greenhouse temperature drop 4 ~ 6℃, reduce temperature in the greenhouse. By choosing different shading rate curtain, it can meet the sunshine demand of different crops. 

This system is installing inner sunshade net in the greenhouse.In summer, it can reduce the inner temperature, and in winter and in night, it can prevent the heat running off. It has two types, ventilation type and thermal insulation type.

Cooling system can decrease the temperature according to the principle of evaporation of water for cooling. System has high-quality cooling pads and the fans with big wind.The core of cooling system is the cooling pads, which can evaporate water, is made of corrugated fiber paper.it is corrosion resistant and has long working life, because the raw material is added to a special chemical composition. The special  cooling pads can ensure the water wets whole wall of  cooling pads. When the air goes through the pads, the exchange of water and air on the surface of pads can change the hot air into cool air, then it can humidify and cool the air.

Greenhouse ventilation system is divided into two kinds, natural and forced ventilation. Glass greenhouse natural ventilation is opening staggered windows on the roof. Forced ventilation is achieved through installing blowers. In general, we install the cooling system of fans and cooling pad. Ventilation systems can be customized according to customer needs and planting conditions.

Heating system has two types, one type is using the boiler to provide heat, and another uses of electric. Boiler fuel can choose coal, oil, gas and bio fuels. Boilers need laying of pipelines and water warming blower to heat. If use electricity, you need electric warm air blower to heat.

Greenhouse compensating light, also called plants light, is a required light of supplying light to the plants for growing and developing, instead of sunlight according to the natural law of plant growth and the principle of plants using sunlight for photosynthesis. At this moment most of farmers use high pressure sodium lamp and LED lamp.

We supply two types of irrigation system, drip irrigation system and spray irrigation system. So you can choose the best one for your greenhouse.

Nursery bed has Fixed bed and movable bed. Movable nursery bed specifications: seedbed standard height 0.75m, can be adjustable a little. Standard width 1.65m, can be changed according to the width of the greenhouse, and length can be customized according to the user requirements; movable bed grid 130 mm x 30 mm (length x width), hot dip galvanized material, high corrosion resistance, good load-bearing capacity, long service life. Specifications for the fixed bed: length 16m, 1.4m wide, height 0.75m.

The main purpose is to achieve real-time monitoring of the CO2 concentration in the greenhouse, so that the CO2 in the greenhouse is always within the range of crops suitable for crop growth.Mainly including CO2 detector and CO2 generator. The CO2 sensor is a sensor used to detect CO2 concentration. It can monitor the environmental parameters in the greenhouse in real time and make adjustments based on the monitoring results to ensure a suitable growth environment for plants.

Greenhouse control system is generally composed of control cabinet, sensors and circuits, which can be realized semi automatic control. You can also use the computer to intelligently control the greenhouse systems through installing networking.

Mainly includes: purification system, water tank, irrigation system, water and fertilizer integrated machine